A.S.Controls

Controls

Process Controllers

Temperature Controllers

Temperature Indicators

Replaceable Filter Driers

Accumulators

Information

Products/ Humidistat

Application

temp_f; echo $boise . "°"; ?>

Installation

Select a location about 5 feet (1.5 meters) above the floor in an area with good Air circulation at average temperature. Minimum operation Temperature is 60° F(15.5° C), maximum operation termperature is 125° F (51.5° C)

Do not mount the humidity controller where it may be affected by

-	Drafts of dead spots Behind doors and in corners.
-	Hot or cold air from ducts.
-	Radiant heat from the sun or appliances.
-	Concealed pipes and chimneys.
-	Unheated (uncooled) areas behind the controller.

Operation

The H600A (humidifier Model) make contact on a humidity fall to the set point minus the differential to start the humidifier. In most humidifier systems the fan must be Operation before the humidifier will start. An Increase in humidity to the set point breaks the contacts and stops the humidifier.

The H600A (dehumidifier Model) make contact on a relative humidity rise to the set point minus the differential breaks the switch contacts to stop the dehumidifier. Turn the control clockwise to the stop for positive on operation and counterclockwise for positive off.

MODEL	RANGE	DIFFERENTIAL % RH FIXED	CURRENT CAPACITY
H600A	10-80%	4%	240 VAC / 5A

AT OUTSIDE TEMPERATURE		RECOMMENDED SETTING	AT OUTSIDE TEMPERATURE		RECOMMENDED SETTING
°F	°C	RECOMMENDED SETTING	°F	°C	RECOMMENDED SETTING
-20	-28	15 %	+ 10	-12.0	30%
-10	-23	15 %	+ 10	-6.5	35%
-0	-17	25 %	Above + 20	Above -6.5	40%

<< Back to Product